VOIP FORUM

Hi

I hope someone can shed some light to what I need to get this working.
I have a Cisco 7940 phone ( Sip firmware 7.5 ) but when I follow the
sipgate online configuration example I can get a dial tone and I can
call the test number and hear the recorded message (german Language),
but I cannot call other number or receive any call (both sip - sip and
pstn -sip or sip to pstn).

Below is my configuration, please note I have a public ip dedicated to
the phone so Im not using nat and no firewall restriction.

dhcp server : Disabled
my ip addr : 2**.**5.**7.***
subnet mask : 255.255.255.248
defaultgw : 2**.**5.**7.***
dyn dns addr 1 : 0.0.0.0
dyn dns addr 2 : 0.0.0.0
dns addr : 2**.*3.*.*
dns backup 1: 2**.*3.*.*
primary tftp addr : 2**.**5.**7.**
dyn tftp addr : 0.0.0.0
my mac addr : 000b:46e9:ab60
domain name : sipgate.co.uk
my name : SIP000B46E9AB60
Status Flags : 12300001

image version : P0S3-07-5-00
FirmLoadID : PC03C300
DSPLoadID : PS03AT46
network media type : Full100
network port2 type : Hub/Switch
tos media : 5
phone label : my sipagate id
tftp cfg dir :
phone password : ***********
phone prompt : sip
language : english
sntp mode : DirectedBroadcast
sntp server : 6*.4.9*.2**
time zone : GMT
dst offset : 1
dst start month : April
dst start day : 0
dst start day of week : Sun
dst start week of month : 1
dst start time : 02
dst stop month : Oct
dst stop day : 0
dst stop day of week : Sunday
dst stop week of month : 8
dst stop time : 2
dst auto adjust : 1
time format 24hr : 1
date format : M/D/Y
nat enable : 0
nat address : UNPROVISIONED
voip control port : 5060
start media port : 16384
end media port : 32766
sync : 1
xml card dir :
xml card file : CARD.XML
telnet level : 2
services url :
directory url :
logo url :
http proxy addr : UNPROVISIONED
http proxy port : 80
garp enable : 1
enable vad : 0
dial template : dialplan
callerid blocking : 0
anonymous call block : 0
autocomplete : 1
messages uri :
dnd control : 0
preferred codec : g729a
dtmf outofband : avt
dtmf avt payload : 101
dtmf db level : 3
dtmf inband : 1
line1 name : my sipgate username
line2 name :
line1 authname : my sipgate id
line2 authname :
line1 password : **********
line2 password : **********
line1 shortname : +44 207 0******
line2 shortname : UNPROVISIONED
line1 displayname : +44 207 0******
line2 displayname :
proxy1 address : sipgate.co.uk
proxy2 address :
proxy1 port : 5060
proxy2 port : 5060
sip retx : 10
sip invite retx : 6
timer t1 : 500
timer t2 : 4000
timer invite expires : 180
timer register expires : 3600
proxy register : 1
proxy backup :
proxy emergency :
proxy backup port : 5060
proxy emergency port : 5060
outbound proxy : UNPROVISIONED
outbound proxy port : 5082
nat received processing : 0
mwi status : 0
call waiting : 1
user info : phone
cnf join enable : 1
remote party id : 0
semi attended transfer : 1
call hold ringback : 0
stutter msg waiting : 0
cfwd url :
call stats : 1
auto answer : 0
local cfwd enable : 1
timer register delta : 5
sip max forwards : 70
rfc 2543 hold : 0

line1 displayname : XXXXXXX # your 7 digit sipgate sip id
line1 name : XXXXXXX # ditto

Have a look at the Cisco SIP phone admin guide
http://www.cisco.com/application/pdf/en/us/guest/products/ps2156/c2001/ccmigration
09186a00801d1972.pdf
for an explanation of all the configurable parameters.

Also if your phone isnt behind a firewall Id change telnet level to 0

Changing the line1 displayname and line1 name to the 7 digit sipgate id
solve the problem and now I can move the phone behind a firewall.

Many thanks to themgt.

Changing the line1 displayname and line1 name to sipgate id solve the
problem and now move the phone behind a firewall.

Many thanks to themgt.